Product range
Automated Guided Vehicles(AGVs) sensors
and accessories
Sensors to ensure the proper autopilot of AGVs.
- □ Guide Sensors for steering and address reader sensors for acceleration, deceleration, stopping and branching. For Guide Sensors, we have many different output types available, incl. linear and step-like analog voltage, parallel (multiple switch), serial, CAN but not limited to.
- □ And various Guide Tapes (target magnet strips) of different lengths, shapes, colors and curvature are available.
List of Guide Sensors
Linear analog voltage output type
Standard models
GS-315 / GS-944
Step-like analog voltage output type
Standard models
GS-215 / GS-2744B*
＊ Not for new designs
Parallel (multiple switch) output type
8-, 15- and 16-bit parallel
GS-108 / GS-408 / GS-115 / GS-116
CAN interface compatible
Achieve reduced wiring
GS-530 / GS-550
Guide Tapes
Optimized for MACOME make Guide Sensors
MGL / MGR / MG
2-ch address reader
Individual switch output for both N- and S-poles
SMR-100C / SMG-100
6-bit address reader
Identifies 64 codes (6-bit)
SMR-4550 / SMG-4550
8-bit address reader
Identifies 256 codes (8-bit)
SMR-2352H2 / SMG-2352
3-ch direction sensor
Good for rotational count detection of rotating objects.
UP/DOWN/GATE (leftward, rightward and on-magnet) signals
SW-2507F
4-ch direction sensors
Good for rotational count detection of rotating objects.
LEFT / CENTER / RIGHT / GATE (left hand, center, right hand
and on-magnet) signals
PS-4482-N / PS-4482-S
Comparison of AGV sensors
Guide Sensors (GS series)
※1 Do not use for designing new products. This product is in the end-of-life phase and sales continue to be limited to maintenance and existing designs.
※2 Electrically compatible but with different voltage slope. Check the specification sheet for details.
※3 Highly compatible, but please check with the actual device for making sure they are working identically.
Guide Tapes (MG, MGL and MGR series)
□：specify B (blue), Y (yellow) and G (green) color codes
Address readers (SMR series)
※ Do not use SMR-106 to design new products. Use SMR-4550 instead.
SMR-specific target magnetic plates (SMG series)
Direction sensors
